A substantial form of protection for pallet racking uprights, protects against low level impact damage caused by forklift trucks.
These upright protectors can absorb large impacts and is quickly attached to a pallet racking upright without the need for additional fasteners.
Metal Column protection with shock absorbing foam inside.
A robust barrier ideal for protecting vulnerable areas from forklift damage and general low level impact.
Used between pallet racking beams to create shelves, ideal for picking at waist level.
Mesh shelving sits on the pallet racking beams and acts as a shelf or decking.More info about Wiremesh shelving>>
Slated pine panels placed between the pallet racking beams support small goods or undersized pallets.
A Strong 500mm High Metal Tubualr Barrier for rack end protection finished in bright RAL1004 Yellow.
Clipping over the front and rear beams these support undersized or damaged pallets.
A useful safety feature which prevents pallets from falling down the back of the rack.
The pull out unit is secured to the racking beam enabling a loaded pallet to be pulled out of racking for picking.
This pull out unit can be secured to the floor, with casters at the front, enabling floor level pallets to be pulled out of the racking.
Tunnel guards are placed between beams and will support undersized pallets.
Ideal for vertical standing long goods, made to order and customised for your products. They are fixed to the rear beam.
For the storage of cable reels or oil barrels.
If (hazardous) liquids might leak, then drip trays may be placed on the floor (or per level). The drip trays are galvanized. Various sizes are available.
For storage of large cable reels or carpet rolls. A supporting rod, with high weight capacity, can easily be taken in and out of position.
Metal mesh product that offers protection for a variety of scenarios. More info about Anti Collapse Mesh>>
Label holder, self-adhering or with magnetic tape for different kind of shelves and beams. More info about Sign & Marking system>>
Signage for loading and assembly instructions, which can be mounted on the racks.
Beam locking pins are required for the connector at each end a beam.
Leveling plates are used underneath uprights to correctly raise the height of an upright.